- Home
- Products
- Cleaning Agents
- DECOTRON® - Water-based
DECOTRON® - Water-based - Cleaning Agents
Decotron® 250
Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.
Technical data sheet
Decotron® 281
Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.
Technical data sheet
Decotron® 239
Water-based cleaning fluid determined to remove residues of a solder paste and uncured epoxy-based SMT adhesives from printing stencils, PCBs misprints and squeegees. Effective cleaning of process residues (dust, grease) from aluminium parts and plastics with good evaporation properties after cleaning.
Technical data sheet►
Decotron® CP381
Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process. Ready-mix, intended for direct use. Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.
Technical data sheet
Decotron® 23
Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.
Technical data sheet
Decotron® T300SA
Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, pallets and masks and parts of reflow ovens and wave soldering machines. Extra strong ready-mix intended for heavily polluted parts. Additive against oxidation of aluminium.
Technical data sheet
Decotron® EFD1
The water-based cleaning agent (stripper) is determined to remove cured and uncured conformal coatings from coating frames, PCBs (varnish remover pcb), and coating machine parts components. Intended for removing acrylate and polyurethane coatings. Ready-mix, intended for direct use. Intended for use in cleaning systems with air-bubbling or high-pressure spray-in-air cleaning technology.
Technical data sheet
Decotron® 351S
Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process. Intended for use in all types of DCT cleaning machines, mainly in the ultrasonic and high-pressure spray-in-air cleaning machines.
Technical data sheet
Decotron® 355S
Water-based cleaning fluid determined to clean flux residues from PCBs after the soldering process. Intended for use in InJet types of DCT cleaning machines with high-pressure spray-in-air cleaning technology.
Technical data sheet
Decotron® ACW 115
Water-based cleaning fluid determined to remove dust particles and grease from aluminium parts. Designed for use as a rinsing fluid for aluminium parts after cleaning with Proton® 703. Ready-mix, designed for direct use.
Technical data sheet
Decotron® M50
A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of flux residues. Developed for areas with common contamination levels, minimum smell.
Technical data sheet
Reflow Cleaner 88
A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of solder paste and flux residues. Developed for areas with high contamination levels. The increased smell, lower compatibility with aluminium-based alloys.
Technical data sheet
Reflow Cleaner 94
A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of flux residues. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.
Technical data sheet►| Name | Download documentation |
|---|---|
| Decotron® 250/25 | Download |
| Decotron® 259 | Download |
| Decotron® 270 | Download |
| Decotron® 331S | Download |
| Decotron® 333F | Download |
| Decotron® C55S | Download |
| Decotron® CP382 | Download |
| Decotron® CP384 | Download |
| Decotron® T300S | Download |
| Decotron® T301SA | Download |
| Decotron® T311 | Download |
| Decotron® T317 | Download |
| Decotron® T383 | Download |
| Decotron® T389 | Download |
| Decotron® T390 | Download |
| Decotron® T391 | Download |