External filtration - filter replacement

Start by draining liquid from the filters.

ACTIVATED CARBON

1. Open the filter with the key, pull the roller on the side and lift the lever.
2. Remove the spring with the pressure plate.
3. Pull out the used bags with activated carbon (ACTIVE CARBON).
4. Insert the 2 new activated carbon (ACTIVE CARBON) bags into the housing.
5. Put the spring with the pressure plate back into the housing.
6. Replace the seal (O-ring) with a NEW .
7. If necessary, wipe the seal seat before inserting.
8. Check the drain hole. It must stay above the pressure plate.
9. Close the filter cover.
10. ENSURE THAT THE FILTER COVER IS CLOSED CORRECTLY!

IONEX

1. Open the filter with the key, pull the roller on the side and lift the lever.
2. Remove the spring with the pressure plate.
3. Remove the mechanical filter.
4. Pull out the 2 used bags with IONEX.
5. Insert the 2 new IONEX bags into the housing.
6. Take a new 1μm filter insert into the housing.
7. Replace the seal (O-ring) with a NEW .
8. If necessary, wipe the seal seat before inserting.
9. Put the spring with the pressure plate back into the housing.
10. Check the drain hole. It must stay above the pressure plate.
11. Close the filter cover.
12. ENSURE THAT THE FILTER COVER IS CLOSED CORRECTLY!

1. Open the filter with the key, pull the roller on the side and lift the lever.
2. Remove the spring with the pressure plate.
3. Remove the mechanical filter.
4. Pull out the 2 used bags with IONEX.
5. Insert the 2 new IONEX bags into the housing.
6. Take a new 1μm filter insert into the housing.
7. Replace the seal (O-ring) with a NEW .
8. If necessary, wipe the seal seat before inserting.
9. Put the spring with the pressure plate back into the housing.
10. Check the drain hole. It must stay above the pressure plate.
11. Close the filter cover.
12. ENSURE THAT THE FILTER COVER IS CLOSED CORRECTLY!

Thanks for watching! Now you can clean with optimal parameters.