Liquids - refill (InJet® Combo)

  1. If the fluid level is low, log in to the "Engineer" or "Maintenance" profile.
  2. Press "Service" in the main menu.
  3. Open the process chamber door.
  4. Press “Tank rinse close” and wait for “Tank rinse open”.
  5. Refill the rinsing liquid through the process chamber.
  6. Make sure you put the right liquid in the right tank!
  7. When the cleaning liquid is refilled, press "Tank clean close" and wait for "Tank clean open".
  8. Refill the rinsing liquid through the process chamber.
  9. Make sure you put the right liquid in the right tank!
  10. When the rinsing liquid is refilled, press "Tank pre-rinse close" and wait for "Tank pre-rinse open".
  11. When the pre-rinsing liquid is refilled, press "Back".
  12. Log Out
  13. At the end, just close the process chamber door.
  14. The cleaning machine is ready.

Contact us