PROTON® - Solvent-based - Cleaning Agents

Proton® 703

Proton® 703

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts. Intended specifically for the dissolving of silicone coatings, also effective for most types of acrylic coatings. High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use. Intended for use in all types of cleaning machines, mainly for the air bubble and ultrasound.

Technical data sheet
Proton® 21

Proton® 21

Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use.Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly for the high-pressure spray-in-air technology.

Technical data sheet
Flux Remover 4

Flux Remover 4

PCB cleaning spray designed for manual cleaning of PCBs after the soldering process. Special PCB cleaning brush made of a mixture of polyethers (PEEK) - with optimal hardness, developed especially for PCB cleaning.  Thanks to the unique material of the fibres, they are not sorted and their working life is extended. Each spray contains a bristle PCB cleaning brush. PCB cleaning brushes are directly intended for use in chemically aggressive solvents. The fibres are abrasion resistant and show very good results with frequent use. High evaporation - the remaining fluids will quickly evaporate and the board stays completely dry.

Technical data sheet
Proton® 23

Proton® 23

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes and most types of SMT adhesives. Ready-mix, intended for direct use.

Technical data sheet
Proton® 29

Proton® 29

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes and most types of SMT adhesives. Ready-mix, intended for direct use.

Technical data sheet
Proton® 69

Proton® 69

Alcohol-based cleaning fluid determined to remove cured and uncured acrylic conformal coatings from coating frames, PCBs and components of coating machine parts. Determined to clean also uncured epoxy adhesives from stainless steel stencils and plastic pumpprints. Ready-mix intended for direct use. Designed for use in all types of cleaning machines.

Technical data sheet
Proton® 275

Proton® 275

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts. Used for epoxide, polyurethane and acrylic coatings. Ready-mix, intended for direct use. Intended for use in all types of cleaning machines, mainly for the ultrasound.

Technical data sheet
Stencil Cleaner 11

Stencil Cleaner 11

Manual cleaning of printing stencils and squeegees. Suitable for the pre-cleaning and cleaning of flux and SMT adhesives from printing stencils and squeegees. Not necessary to rinse after the cleaning process.

Technical data sheet
Proton® R07

Proton® R07

Alcohol-based rinsing fluid determined to rinse PCBs and some types of coating frames after cleaning with Proton® 703. Ready-mix, intended for direct use.

Technical data sheet
NameDownload documentation
Proton® 101Download
Proton® MEKDownload

Contact us